Skip to main content

1.3 Configuration Sections

There are six config sections in the Meshtastic firmware, these are broken out so they can be sent as small admin messages over the mesh.

Default settings values are prefered whenever possible as they consume no bandwidth when sent over the mesh.

NameDescription
DeviceDevice config options are: Device Role, Serial Output, Debug Log and Factory Reset.
DisplayDisplay config options are: Screen On Duration, Auto Carousel Interval, and GPS Format.
LoRaThe LoRa config options are: Region, Modem Preset, Max Hops, Transmit Power, Bandwidth, Spread Factor, Coding Rate, Frequency Offset, Transmit Disabled and Ignore Incoming Array.
PositionPositon config options are: GPS Enabled, GPS Update Interval, GPS Attempt Time, Fixed Postion, Smart Broadcast, Broadcast Interval and Position Packet Flags.
PowerPower config options are: Charge Current, Power Saving, Shutdown after losing power, ADC Multiplier Override Wait Bluetooth Interval, Mesh Super Deep Sleep Timeout, Super Deep Sleep Interval, Light Sleep Interval and Minimum Wake Interval.
UserThe user config options are: Short Name, Long Name, Licensed Operator, Transmit Power at Antenna Connector, Antenna Gain and Antenna Azimuth.
WiFiWiFi config options are: AP Mode, Hidden AP, SSID and Password.