Skip to main content

T-Beam Hardware Buttons


  • Power Button (left):
    • Long press: Powers the device on or off.
  • Reset Button (right):
    • Single press: Resets the device.
  • User/Program Button (middle):
    • Long press: Will signal the device to shutdown after 5 seconds.
    • Single press: Changes the information page displayed on the device's screen.
    • Double press: Sends an adhoc ping of the device's position to the network.
    • Triple press: Disables the device's GPS. Repeat to re-enable. (This will be indicated on both information screen pages on the device's display as shown below)