Skip to main content

Seeed Wio-SX1262 Series

XIAO ESP32-S3 & Wio SX1262 Kit

Note

The Wio-SX1262 module shipped with this kit does not have the same pin configuration as the one shipped with the XIAO nRF52840 kit. If you want to use a Wio-SX1262 module from a different Seeed kit with a XIAO ESP32S3, you may need to flash custom firmware with the correct pin definitions.

A compact LoRa development kit, combining WiFi, Bluetooth, and LoRa connectivity. It features an integrated power management chip and supports expansion via I²C, UART, and GPIO interfaces with compatibility for Arduino development.

Specifications

  • MCU
    • XIAO ESP32S3 (WiFi & Bluetooth)
  • LoRa Transceiver
    • Semtech SX1262
  • Frequency options
    • 862-930 MHz
  • Connectors
    • USB-C
    • Antenna
      • Dedicated 2.4 GHz metal spring antenna for WiFi/Bluetooth
      • U.FL/IPEX antenna connector for LoRa

Features

  • Thumb-sized Compact Design: 21 x 18mm, adopting the classic form factor of XIAO.
  • Grove Connectors: 400+ Grove-compatible GPIOs for flexible expansion options.
  • L76K GNSS Module available: A compatible Seeed L76K GNSS Module is available with the same form factor as the XIAO nRF52840 & Wio-SX1262 Kit.
    • When using the Seeed L76K GNSS Module together with this kit, the L76K RST pin is shared with the Wio-SX1262 RST pin. In order to use these modules together, you must cut the pin so that is not connected to the L76K GNSS Module.

Resources

Pin Map

SenseCAP Indicator for Meshtastic SenseCAP Indicator for Meshtastic