Seeed Studio®
Seeed Studio is a tech company focused on Edge AI and IoT. With the mission of "making technology accessible for all", Seeed Studio has been embracing open source since DAY 1. Seeed works closely with the Meshtastic community to bring easy-to-use, affordable products to community members. By listening to the voices, communicating and collaborating closely with innovators in this community, iterations of products and new services are brought to life.
SenseCap
The SenseCAP product line offers a comprehensive range of solutions for both hobbyists and industrial users, featuring the T1000-E card tracker, an IP65IP65An enclosure rating under IEC 60529. Dust-tight, and protected against low-pressure water jets from any direction.-rated, ready-to-go Meshtastic handheld device, the Indicator with a 4-inch touchscreen driven by ESP32ESP32A chipset of microcontroller made/designed by Espressif, used by a number of devices. Higher power usage than nRF52, but often cheaper and supports Wi-Fi if desired.-S3 and RP2040rp2040A microcontroller chip developed by Raspberry Pi, featuring dual ARM Cortex-M0+ processors. Dual-MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board., the Solar Node, a solar-powered device designed for long-term outdoor deployment, and the MeshTracker X1, an IP66IP66An enclosure rating under IEC 60529. Dust-tight, and protected against powerful water jets.-rated card-sized tracker with dual-band GNSSGNSS (Global Navigation Satellite System). A multi-constellation satellite positioning receiver. Hardware listing GNSS support typically receives GPS, BeiDou, GLONASS and QZSS.. These devices are designed to be user-friendly, with pre-flashed Meshtastic firmware for easy setup and operation.
| Name | MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board. | Radio | Wi-Fi | BT | GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. |
|---|---|---|---|---|---|
| Card Tracker T1000-E | nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. | LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4. | NO | 5.1 | YES |
| SenseCAP Indicator | ESP32ESP32A chipset of microcontroller made/designed by Espressif, used by a number of devices. Higher power usage than nRF52, but often cheaper and supports Wi-Fi if desired., RP2040rp2040A microcontroller chip developed by Raspberry Pi, featuring dual ARM Cortex-M0+ processors. | SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series. | 2.4GHz b/g/n | 5.0 | OPTIONAL |
| SenseCAP Solar Node | nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. | SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series. | NO | 5.0 | OPTIONAL |
| MeshTracker X1 | nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. | LR2021 | NO | 5.0 | YES |
Wio Series
A lineup of development boards and modules for hobbyists and prototyping, with a variety of MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board. and sensor options. Most models are intended for integration into custom projects, while the Tracker L1 has a "Pro" variant that is available as a ready-to-go handheld device with a pre-installed case and battery.
| Name | MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board. | Radio | Wi-Fi | BT | GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. |
|---|---|---|---|---|---|
| Wio Tracker L1 | nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. | SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series. | NO | 5.0 | YES |
| XIAO nRF52840 & Wio-SX1262 Kit | nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. | Wio-SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series. | NO | 5.0 | OPTIONAL |
| XIAO ESP32-S3 & Wio-SX1262 Kit | ESP32ESP32A chipset of microcontroller made/designed by Espressif, used by a number of devices. Higher power usage than nRF52, but often cheaper and supports Wi-Fi if desired.-S3 | Wio-SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series. | 2.4GHz b/g/n | 5.0 | OPTIONAL |