Seeed Wio-SX1262 Series
- XIAO ESP32-S3
XIAO ESP32-S3 & Wio SX1262 Kit
Note
The Wio-SX1262 module shipped with this kit does not have the same pin configuration as the one shipped with the XIAO nRF52840 kit. If you want to use a Wio-SX1262 module from a different Seeed kit with a XIAO ESP32S3, you may need to flash custom firmware with the correct pin definitions.
A compact LoRa development kit, combining WiFi, Bluetooth, and LoRa connectivity. It features an integrated power management chip and supports expansion via I²C, UART, and GPIO interfaces with compatibility for Arduino development.
Specifications
- MCU
- XIAO ESP32S3 (WiFi & Bluetooth)
- LoRa Transceiver
- Semtech SX1262
- Frequency options
- 862-930 MHz
- Connectors
- USB-C
- Antenna
- Dedicated 2.4 GHz metal spring antenna for WiFi/Bluetooth
- U.FL/IPEX antenna connector for LoRa
Features
- Thumb-sized Compact Design: 21 x 18mm, adopting the classic form factor of XIAO.
- Grove Connectors: 400+ Grove-compatible GPIOs for flexible expansion options.
- L76K GNSS Module available: A compatible Seeed L76K GNSS Module is available with the same form factor as the XIAO nRF52840 & Wio-SX1262 Kit.
- When using the Seeed L76K GNSS Module together with this kit, the L76K
RST
pin is shared with the Wio-SX1262RST
pin. In order to use these modules together, you must cut the pin so that is not connected to the L76K GNSS Module.
- When using the Seeed L76K GNSS Module together with this kit, the L76K
Resources
Pin Map