Zum Hauptinhalt springen

Seeed Wio-SX1262 Series

XIAO nRF52840 & Wio SX1262 Kit​

Note

The Wio-SX1262 module shipped with this kit does not have the same pin configuration as the one shipped with the XIAO ESP32S3 kit. If you want to use a Wio-SX1262 module from a different Seeed kit with a XIAO nRF52840, you may need to flash custom firmware with the correct pin definitions.

A thumb-sized LoRa dev kit based on the nRF52840 MCU, supporting BLE, and LoRa. It includes a built-in power management chip and can be extended via I²C, UART, and other GPIO interfaces, with compatibility for Arduino development.

Specifications​

  • MCU
    • XIAO nRF52840 (Bluetooth)
  • LoRa Transceiver
    • Semtech SX1262
  • Frequency options
    • 862-930 MHz
  • Connectors
    • USB-C
    • Antenna
      • U.FL/IPEX antenna connector for LoRa

Features​

  • Thumb-sized Compact Design: 21 x 18mm, adopting the classic form factor of XIAO.
  • L76K GNSS Module available: A compatible Seeed L76K GNSS Module is available with the same form factor as the XIAO nRF52840 & Wio-SX1262 Kit.

Resources​

Pin Map​

xiao_nrf52840 wio-sx1262