Nano Series
The Nano Series, designed by Neil Hao from B&Q Consulting and powered by Meshtastic, are devices engineered to be a portable and durable solution for outdoor adventures such as hiking, piloting, skiing and more. They are designed to strike a balance between RF performance, size, ruggedness, and power efficiency — providing users with a reliable solution in various outdoor environments.
For a full and complete comparison of the different devices in the Nano series, be sure to visit B&Q Consulting's nano series wiki page.
- Nano G1 Explorer
- Nano G1
Nano G1 Explorer
The Nano G1 Explorer, powered by Meshtastic, is a significant upgrade from the Nano G1. It incorporates the latest RF technologies from B&Q Consulting, featuring a new internal wide-band LoRa antenna that can support frequencies ranging from 815 MHz to 940 MHz. With this new antenna, combined with an optimized wide-band LoRa RF frontend circuit, the Nano G1 Explorer is capable of working with the majority of LoRa frequency bands worldwide without the need for antenna changes. The device's design also takes into account the potential impact of the human body on its antenna performance, ensuring optimal RF performance even when carried in a pocket.
Specifications
- MCU:
- ESP32 WROOM (WiFi & Bluetooth)
- Bluetooth 4.2
- ESP32 WROOM (WiFi & Bluetooth)
- LoRa Transceiver:
- Semtech SX1262
- Frequency Options:
- US (902.0Mhz to 928.0Mhz), EU_868 (869.4Mhz to 869.65Mhz), JP (920.8Mhz to 927.8Mhz), ANZ (915.0Mhz to 928.0Mhz), RU (868.7Mhz to 869.2Mhz), KR (920.0Mhz to 923.0Mhz), TW (920.0Mhz to 925.0Mhz), IN (865.0Mhz to 867.0Mhz), NZ_865 (864.0Mhz to 868.0Mhz), TH (920.0Mhz to 925.0Mhz), UA_868 (868.0Mhz to 868.6Mhz), MY_919 (919.0Mhz to 924.0Mhz), SG_923 (917.0Mhz to 925.0Mhz).
- Navigation Module:
- ATGM336H-5N-71 (Supports GPS, BDS and GLONASS)
- Antenna:
- New internal wide-band antenna with optimized wide-band LoRa RF frontend circuit.
- Connectors:
- USB-C
Features
- Meshtastic pre-installed.
- New internal GPS antenna that significantly reduces GPS lock time compared to the Nano G1. Additionally, the GPS module can be set to a low-power mode with the GPS physical switch.
- Integrated enhanced message notification circuit for LED or Buzzer, configurable via physical switches.
- Physical power switch to easily turn the device on/off.
- Replaceable 1.3" OLED screen with a FPC connector.
- Internal Li-Polymer Battery Charger. (An optional 3.7V 603450 JST 1.25mm Rechargeable Li-Polymer Battery can also be installed.)
- Buck-boost converter to provide stable 3.3V to the system even in the event the Li-Polymer battery voltage drops to as low as 2.5V. Supply voltage stability is very important to ensure that the performance of RF circuits meets design expectations.
Resources
- Firmware file:
firmware-nano-g1-explorer-X.X.X.xxxxxxx.bin - Unit Engineering's Official Wiki
Nano G1
The Nano G1 is the first dedicated hardware device to be designed from scratch purely for Meshtastic by Neil Hao. It has been designed to be small and compact with the inclusion of a high quality internal PCB antenna.
Specifications
- MCU
- ESP32 WROOM (WiFi & Bluetooth)
- Bluetooth 4.2
- ESP32 WROOM (WiFi & Bluetooth)
- LoRa Transceiver
- Semtech SX1276
- Additional ultra-low noise amplifier to improve LoRa receiver sensitivity
- Frequency options
- US-915 MHz
- Navigation Module
- ATGM336H-5N-71 (Supports GPS, BDS and GLONASS)
- Antenna
- Built in 915Mhz Lora PCB Antenna (VSWR <=1.5 @ 915 MHz)
- Connectors
- USB-C
Features
- Meshtastic pre-installed
- User button
- 1.3 inch OLED screen
- Buzzer
Resources
- Firmware file:
firmware-nano-g1-X.X.X.xxxxxxx.bin - Unit Engineering's Official Wiki
