Seeed Wio-WM1100
Note
Currently, LR1110 radios are unable to receive Meshtastic packets from the older SX127x radios. Semtech is aware of this issue, and we're hopeful they'll provide a solution soon.
- WM110 Dev Kit
- Wio Tracker 1110
Seeed Wio-WM1110 Dev Kit
External GPS Required
The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS (Air530).
- MCU
- Nordic nRF52840
- LoRa Transceiver
- Semtech LR1110
- Frequency options
- 868 MHz
- 915 MHz
- 923 MHz
- Navigation Module
- Grove GPS Air530 (Supports GPS, Beidou, Glonass, Galileo, QZSS, SBAS)
- Connectors
- USB-C
- LoRa Antenna: SMA antenna connector and U.FL/IPEX
- GNSS Antenna: RP-SMA antenna connector U.FL/IPEX
- NFC Antenna: U.FL/IPEX
- GPIO
- I2C x1
- UART x1
- Solar Panel
- SWDIO
Features
- Temperature and Humidity Sensor (SHT41)
- 3-Axis Accelerometer(LIS3DHTR)
- Reset switch, power jumpers, 2 configurable buttons
- AAA Battery x3
- Screen sold separately
Resources
- Firmware file:
firmware-wio-sdk-wm1110-X.X.X.xxxxxxx.bin - Purchase Links:
- International
Wio Tracker 1110 Dev Kit for Meshtastic
- MCU
- Nordic nRF52840 (BLE 5.3)
- LoRa Transceiver
- Semtech LR1110
- Frequency options
- 868 MHz
- 915 MHz
- 923 MHz
- Navigation Module
- Semtech LR1110
- Connectors
- USB-C
- LoRa Antenna: on-board and U.FL/IPEX
- GNSS Antenna: on-board and U.FL/IPEX
- Grove connectors: ADC x1, I2C x1, UART x1, Digital x3
Features
- Temperature and Humidity Sensor (SHT41)
- 3-Axis Accelerometer(LIS3DHTR)
- Reset switch, power jumpers
- Screen sold separately
Resources
- Firmware file:
firmware-wio-tracker-wm1110-X.X.X.xxxxxxx.bin - Purchase Links:
- International
