SenseCAP MeshTracker X1
The SenseCAP MeshTracker X1 is a card-sized IP66IP66An enclosure rating under IEC 60529. Dust-tight, and protected against powerful water jets.-rated tracker for Meshtastic, built on the Nordic nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. and a Semtech LR2021 transceiver. Dual-band GNSSGNSS (Global Navigation Satellite System). A multi-constellation satellite positioning receiver. Hardware listing GNSS support typically receives GPS, BeiDou, GLONASS and QZSS. and a five-day battery suit it to asset tracking and field use, and it has no screen.
Specifications
- MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board.
- Nordic nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. (Bluetooth 5.0 LE)
- LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures. Transceiver
- Semtech LR2021
- Frequency options
- 863 - 928 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
- Navigation Module
- Dual-band GNSSGNSS (Global Navigation Satellite System). A multi-constellation satellite positioning receiver. Hardware listing GNSS support typically receives GPS, BeiDou, GLONASS and QZSS.
- Battery Capacity
- Rechargeable lithium battery, 1100 mAh
- Connectors
- USBUSB (Universal Serial Bus). The wired connection used to power a device, flash firmware onto it, and communicate with it over serial.-C
Features
- Up to five days of battery life.
- IP66IP66An enclosure rating under IEC 60529. Dust-tight, and protected against powerful water jets.-rated enclosure.
- Vibration motor for alerts.
- Barometric pressure sensor.
- User button and RGB status LEDLED (Light-Emitting Diode). An indicator light on a device. The External Notification module can drive one in response to mesh activity..
- No screen, so the device is configured from a client.
Resources
- Firmware file:
firmware-seeed_mesh_tracker_X1-X.X.X.xxxxxxx.uf2 - Purchase Links:
- International