SenseCAP Indicator

A 4-inch touchscreen device powered by dual MCUsMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board.—the ESP32ESP32A chipset of microcontroller made/designed by Espressif, used by a number of devices. Higher power usage than nRF52, but often cheaper and supports Wi-Fi if desired. and RP2040rp2040A microcontroller chip developed by Raspberry Pi, featuring dual ARM Cortex-M0+ processors.—that supports WiFi, BLEBLE (Bluetooth Low Energy). The default wireless connection between a node and a phone client., and LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures.®.

Specifications

• MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board.
  • ESP32ESP32A chipset of microcontroller made/designed by Espressif, used by a number of devices. Higher power usage than nRF52, but often cheaper and supports Wi-Fi if desired.-S3 (WiFi & Bluetooth) + RP2040rp2040A microcontroller chip developed by Raspberry Pi, featuring dual ARM Cortex-M0+ processors.
• LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures. Transceiver
  • Semtech SX1262SX1262A Semtech sub-GHz LoRa transceiver, used in most current Meshtastic hardware and recommended over the older SX127x series.
• Frequency options
  • 862-930 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
• Connectors
  • 2 USBUSB (Universal Serial Bus). The wired connection used to power a device, flash firmware onto it, and communicate with it over serial. type-C port
  • 2 Grove Connectors: GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh., and 400+ Grove Sensors
  • Antenna Female connector

Features

• Screen: 3.95 Inch, Capacitive RGB Touch Screen.
• 2 Grove Connectors: 400+ Grove-compatible GPIOsGPIO (General Purpose Input/Output). An uncommitted digital signal pin on a device. for flexible expansion options.

Resources

• Purchase Links:
  • International
    • Seeed Studio Online Store
• User Guide
• Meshtastic UI Guide

Images