Skip to main content
Version: 2.8

SenseCAP Card Tracker T1000-E

Seeed SenseCAP Card Tracker T1000-E

SenseCAP T1000-E is a high-performance tracker designed for Meshtastic. As small as a credit card, effortlessly fitting in your pocket or attaching to your assets. It embeds Semtech's LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4., Nordic's nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption., and Mediatek's AG3335 GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. module, providing Meshtastic users with a high-precision, low-power positioning and communication solution.

Note

Currently, LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4. radios are unable to receive Meshtastic packets from the older SX127x radios, it requires a breaking change to fix this. Transmitting works and when hopping through an SX126x radio, you can still receive packets from SX127x radios.

Specifications​

  • MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board.
    • Nordic nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. (supports Bluetooth)
  • LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures. Transceiver
    • Semtech LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4.
  • Frequency options
    • 865-928 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
  • Navigation Module
    • Mediatek AG3335 GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. chip
  • Battery Capacity
    • Rechargeable lithium battery, 700mAh
  • Charging
    • USBUSB (Universal Serial Bus). The wired connection used to power a device, flash firmware onto it, and communicate with it over serial. magnetic charging cable

Features​

  • Button and Buzzer: For user interaction and alerts.
  • Pogo Pins: Four pins for USBUSB (Universal Serial Bus). The wired connection used to power a device, flash firmware onto it, and communicate with it over serial., DFUDFU (Device Firmware Update). A state in which a device is placed into for it to receive a firmware update., serial logging, and charging.
  • Rugged Build: IP65IP65An enclosure rating under IEC 60529. Dust-tight, and protected against low-pressure water jets from any direction. rated, waterproof and durable for various environments.

Functionality​

  • User/Program Button (face):
    • Long press: Will signal the device to shutdown after 5 seconds.
    • Double press: Sends an adhoc ping of the device's position to the network.
    • Triple press: Enables/Disables the GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. Module on demand.
    • Quadruple press: Temporarily mute or unmute device.

Resources​

Images​

SenseCAP Card Tracker T1000-E for Meshtastic SenseCAP Card Tracker T1000-E Dimensions