Seeed Wio-WM1100
Note
Currently, LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4. radios are unable to receive Meshtastic packets from the older SX127x radios, it requires a breaking change to fix this. Transmitting works and when hopping through an SX126x radio, you can still receive packets from SX127x radios.
- WM110 Dev Kit
- Wio Tracker 1110
Seeed Wio-WM1110 Dev Kit
External GPS Required
The LR1110 GNSS functionality does not yet work. Seeed recommends at Grove - GPS (Air530).
- MCU
- Nordic nRF52840
- LoRa Transceiver
- Semtech LR1110
- Frequency options
- 868 MHz
- 915 MHz
- 923 MHz
- Navigation Module
- Grove GPS Air530 (Supports GPS, Beidou, Glonass, Galileo, QZSS, SBAS)
- Connectors
- USB-C
- LoRa Antenna: SMA antenna connector and U.FL/IPEX
- GNSS Antenna: RP-SMA antenna connector U.FL/IPEX
- NFC Antenna: U.FL/IPEX
- GPIO
- I2C x1
- UART x1
- Solar Panel
- SWDIO
Features
- Temperature and Humidity Sensor (SHT41)
- 3-Axis Accelerometer(LIS3DHTR)
- Reset switch, power jumpers, 2 configurable buttons
- AAA Battery x3
- Screen sold separately
Resources
- Firmware file:
firmware-wio-sdk-wm1110-X.X.X.xxxxxxx.bin - Purchase Links:
- International
Wio Tracker 1110 Dev Kit for Meshtastic
- MCU
- Nordic nRF52840 (BLE 5.3)
- LoRa Transceiver
- Semtech LR1110
- Frequency options
- 868 MHz
- 915 MHz
- 923 MHz
- Navigation Module
- Semtech LR1110
- Connectors
- USB-C
- LoRa Antenna: on-board and U.FL/IPEX
- GNSS Antenna: on-board and U.FL/IPEX
- Grove connectors: ADC x1, I2C x1, UART x1, Digital x3
Features
- Temperature and Humidity Sensor (SHT41)
- 3-Axis Accelerometer(LIS3DHTR)
- Reset switch, power jumpers
- Screen sold separately
Resources
- Firmware file:
firmware-wio-tracker-wm1110-X.X.X.xxxxxxx.bin - Purchase Links:
- International
