Skip to main content
Version: 2.8

Seeed Wio-WM1100

Note

Currently, LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4. radios are unable to receive Meshtastic packets from the older SX127x radios, it requires a breaking change to fix this. Transmitting works and when hopping through an SX126x radio, you can still receive packets from SX127x radios.

Wio Tracker 1110 Dev Kit for Meshtastic​

  • MCUMCU (Microcontroller Unit). The microcontroller that runs the firmware on a device. The hardware tables list the MCU for each supported board.
    • Nordic nRF52840nRF52840A Nordic microcontroller from the nRF52 family, used in devices such as the RAK WisBlock core modules. Provides Bluetooth LE 5.0 and very low power consumption. (BLEBLE (Bluetooth Low Energy). The default wireless connection between a node and a phone client. 5.3)
  • LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures. Transceiver
    • Semtech LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4.
  • Frequency options
    • 868 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
    • 915 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
    • 923 MHzMHz (Megahertz). A unit of frequency equal to one million hertz (cycles per second), used to specify the operating frequency of LoRa devices in the Meshtastic network, affecting range and data rate.
  • Navigation Module
    • Semtech LR1110LR1110A Semtech LoRa transceiver, used in devices such as the Elecrow ThinkNode M3 and M4.
  • Connectors
    • USBUSB (Universal Serial Bus). The wired connection used to power a device, flash firmware onto it, and communicate with it over serial.-C
    • LoRaLoRaA low-power, long-range wireless communication technology used by Meshtastic devices to enable communication over distances of several kilometers without the need for cellular, Wi-Fi, or other traditional network infrastructures. Antenna: on-board and U.FLIPEXA miniature coaxial antenna connector found on many boards. The docs write it as U.FL/IPEX, using the two names interchangeably./IPEXIPEXA miniature coaxial antenna connector found on many boards. The docs write it as U.FL/IPEX, using the two names interchangeably.
    • GNSSGNSS (Global Navigation Satellite System). A multi-constellation satellite positioning receiver. Hardware listing GNSS support typically receives GPS, BeiDou, GLONASS and QZSS. Antenna: on-board and U.FLIPEXA miniature coaxial antenna connector found on many boards. The docs write it as U.FL/IPEX, using the two names interchangeably./IPEXIPEXA miniature coaxial antenna connector found on many boards. The docs write it as U.FL/IPEX, using the two names interchangeably.
    • Grove connectors: ADCADC (Analog-to-Digital Converter). A circuit that turns a varying voltage into a digital value. Devices use one to read sensors and to measure battery voltage. x1, I2CI2CA two-wire bus used to attach peripherals such as sensors and displays to a device. x1, UARTUART (Universal Asynchronous Receiver-Transmitter). A serial interface used to communicate with a device over its pins or through a USB-to-serial bridge. x1, Digital x3

Features​

  • Temperature and Humidity Sensor (SHT41)
  • 3-Axis Accelerometer(LIS3DHTR)
  • Reset switch, power jumpers
  • Screen sold separately

Resources​

  • Firmware file: firmware-wio-tracker-wm1110-X.X.X.xxxxxxx.bin
  • Purchase Links:

wio-tracker-1110-dev-kit