Skip to main content
Version: 2.8

Heltec Sensor Hardware Buttons

Capsule Sensor V3​

The Capsule Sensor V3 has no screen, so its button uses the press gestures rather than a menu.

  • Hold 3 seconds: Power on, or shut down.
  • Double press: Send the device position to the mesh.
  • Triple press: Turn the GPSGPS (Global Positioning System). A satellite positioning system. A node with a GPS module determines its own location and can report that position to the mesh. off. Triple press again to turn it back on.
  • Hold 8 to 16 seconds while shut down: Enter WirelessBoot mode for uploading firmware. The blue indicator lights when the device is ready.